EN
Couplings
Couplings
  • 50,82 incl. VAT
    More Close Add to Cart
    D60,5/103/d-32
    Metal/rubber/metal
    TBZ VBG
    Alternative: 26-050700
  • 168,07 incl. VAT
    More Close Add to Cart
    Alternative: 26-057300
  • 245,27 incl. VAT
    More Close Add to Cart
    VBG drawbars are type approved with two different attachment principles – Vibra block and Briab. The attachment bracket is part of the drawbar itself. Brackets that need to be welded on the trailer must be ordered separately.
    Installation instructions in the link below.
    Alternative: 26-058600
  • 61,83 incl. VAT
    More Close Add to Cart
    Weight -3 kg
    TBZ Multi XF VBG
    Alternative: 26-076000 VBG; B0980103180; Y256100000; Y255000420
  • 107,09 incl. VAT
    More Close Add to Cart

    14 terminals

    Alternative: 28-029000
  • 54,93 incl. VAT
    More Close Add to Cart
    Alternative: 28-029100
  • 123,54 incl. VAT
    More Close Add to Cart

    17 terminals

    Alternative: 28-029200
  • 607,66 incl. VAT
    More Close Add to Cart

    Description Coiled Cable 14-pin
    Working length: 2250 mm
    Max. elongated length: 4000 mm
    Technical requirements in accordance with ISO 4141 parts 1, 2, 4
    Protection class IP67 and IP69K in accordance with DIN 40050

    Alternative: 28-033500
  • 151,86 incl. VAT
    More Close Add to Cart
    14 terminals
    SAL version. SAL (Sealed and Locked) connectors are fitted with a lock hook and special seals.
    2 cable inlets, Ø 10.5 mm – 17.0 mm Protection class IP-54.
    Alternative: 28-034000
  • 96,07 incl. VAT
    More Close Add to Cart

    14 terminals

    Alternative: 28-036000
  • 107,09 incl. VAT
    More Close Add to Cart

    17 terminals

    Alternative: 28-036200
  • 72,84 incl. VAT
    More Close Add to Cart
    Alternative: 28106500 VBG
  • 318,71 incl. VAT
    More Close Add to Cart
    The kit consists of an indicator panel with 12m cable and an BCM electronic unit.
    The BCM electronic unit transmits the signal from the CSM, coupling sensor to the indicating panel in the cab. A green light shows when the coupling is closed and secured, and a red light shows when the coupling is open. Both lights show to confirm the function when the ignition is switched on. The green light can be turned off by pushing the button so that the driver will not be disturbed when driving.
    The VBG Indicating Kit is a complete digital network (CAN-BUS) that meets the requirements of UNECE R55.

    The system handles all communication between the truck coupling and driver. It is an easy-to-install modular system which allows for future functional expansion.
    Alternative: 28-116800 VBG R28117000 + R28106500
  • 353,56 incl. VAT
    More Close Add to Cart
    The kit consists of an indicator panel with 16m cable and an BCM electronic unit.
    The BCM electronic unit transmits the signal from the CSM, coupling sensor to the indicating panel in the cab.
    Alternative: 28-116900 VBG
  • 249,02 incl. VAT
    More Close Add to Cart
    Without extra indication kit in the cab.

    The BCM electronic unit transmits the signal from the CSM, coupling sensor to the truck instrument cluster.
    This indication kit can be used if the vehicle has an approved mounting solution in accordance with UNECE Regulation No.55
    The VBG Indicating Kit consists of the following components:​
    CSM (Coupling Sensor Module) - digital sensor on the coupling that detects whether the coupling is locked or open. ​
    CAN-BUS and power cable (12/16 metres) connecting CSM and BCM.​
    BCM (Body Control Module) -the “brain” in the CAN-BUS system and connects to the vehicle by a mechanic. ​
    VBG Indicating Panel or OEM Cluster – two different options for displaying an open or closed coupling in the cab. Both options are connected to BCM. NOTE! Cluster indication for OEM Cluster can be used if the vehicle has an approved installation solution according to UNECE R55. BCM is connected to the vehicle’s cluster (follow the bodybuilder instructions).

    Alternative: 28-117000 VBG
  • 283,87 incl. VAT
    More Close Add to Cart
    The kit consists of an 16m cable and an BCM electronic unit.
    Alternative: 28-117100 VBG
  • 785,65 incl. VAT
    More Close Add to Cart
    The valve box is used to operate air-assisted VBG couplings (open/close PA, open AM). The box is developed for maximum safety, and the reliable function has been tested under rough conditions.

    The construction is made to exclude handling errors, and it can be easily manoeuvred even with gloves. The coupling is operated with a manual valve that has been developed especially for VBG's high demands on safety and function.

    The box, which is made of a very strong and impact-resistant lightweight material, can be mounted in different directions and is easily connected with push-in nipples. The lid is fitted with strong, reinforced hinges, and when mounted horizontally, the lid is self-closing (should the driver forget to close).

    Valve Box Kit G2 contains a valve box, mounting bracket, 2 air hoses (Ø6 mm and Ø8 mm) and protective housing. The valve box is equipped with push-in nipples.
    Alternative: 29042100 VBG
  • 755,77 incl. VAT
    More Close Add to Cart
    Alternative: 1480534 29-045000 VBG
  • on request incl. VAT
    More Close Add to Cart
    Alternative: 05-063000 VBG
  • 57,60 incl. VAT
    More Close Add to Cart
    For drawbeam sleeve for VBG 750V/795V/795VR/575V/590V/590VR/575V-2
  • on request incl. VAT
    More Close Add to Cart
    29-045000 Control box G2 (new type)
    + 29-045500 Bracket for box 29045000
    Or 29-042100 Control box G2 complete with bracket VBG
    Alternative: 07-107900 29-045000 29-045500
  • on request incl. VAT
    More Close Add to Cart
    Alternative: 07-108000
  • 8,23 incl. VAT
    More Close Add to Cart
    Alternative: 07-108400
  • 1315,27 incl. VAT
    More Close Add to Cart
    The VBG Power actuator fits all VBG couplings and considerably simplifies connecting and disconnecting. The coupling is opened by means of a double-acting pneumatically controlled torsion device, which is operated by a manual value. A coupling fitted with a power actuator significantly improves the ergonomics and makes work a lot easier.
    Alternative: 07-110200
  • on request incl. VAT
    More Close Add to Cart
    Operation - Manual
    Drawbar eye Ø -50
    Weight - 38 kg
    Drawbar - Articulated
    EU coupling class -C50-X
    Hole pattern coupling - 160 x 100 mm
    Drawbar eye Ø - 50 mm
    D value (kN) 190
    Type approval no. - E4*55R-010067
    Alternative: 08-009000 New -> R09315700
  • on request incl. VAT
    More Close Add to Cart
    Alternative: 09-017800
  • on request incl. VAT
    More Close Add to Cart
    Operation: Semi Assisted
    Weight 49 kg
    Drawbar Articulated
    EU coupling class C50-X
    Hole pattern coupling 160 x 100 mm
    Drawbar eye Ø 57 mm
    Type approval no. E4*55R-010064
    D value (kN) 200
    Alternative: 09-031450; New -> 09-317400 VBG; 09317400
  • on request incl. VAT
    More Close Add to Cart
    Ø 57 mm
    Manual
    Weight 59kg - 190
    D (kN) - 190, mounting 160x100 mm
    Alternative: 09-052500; New -> 09-316700 VBG; 09316700
  • 729,63 incl. VAT
    More Close Add to Cart
    for VBG 795V/795V-2/590V incl. pos. 1, 4 and 5
    Alternative: 09-067300
  • on request incl. VAT
    More Close Add to Cart
    NEW -> R09316200
    Alternative: NEW -> R09316200
  • |<
  • <
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • >
  • >|
Showing 271 to 300 of 549 (19 Pages)